Local contractor in 32073

A malfunctioning air conditioning unit required immediate attention to ensure comfort. We thoroughly checked the operation of the 20 and 30 ton AC units, cleaned the drains, and rinsed off the coils for optimal performance. Additionally, we replaced two capacitors for the condenser fan motors on the 20 ton AC, confirming that no other issues were present at this time.

A malfunctioning unit prompted an immediate inspection, revealing that the filter required urgent replacement. We checked the operation of the unit and proceeded to clean the drains, ensuring optimal functionality. To maintain efficiency, we recommend replacing the 16x20x1 filter as soon as possible, which will enhance the unit's performance and prolong its lifespan.

A condenser fan motor failure was impacting the cooling efficiency of the system. We replaced the faulty motor and added 1lb of 407a refrigerant to restore optimal performance. This comprehensive service ensured the air conditioning unit operates smoothly, enhancing the comfort of the space.

An issue with the unit's operation required immediate attention. We conducted a thorough check of the unit’s functionality and ensured all components were in optimal working condition. Additionally, we cleaned the drains to enhance performance and prevent future blockages, ensuring the system operates efficiently.

The need for an efficient, reliable heating and cooling solution led to the replacement of the existing unit with a 2.5-ton Trane unit featuring a 14.2 SEER2 rating and 5 kW heat strips. We connected the new system to the existing refrigerant lines, ductwork, drain line, and electrical supply, ensuring a seamless transition and optimal performance for years to come.

An issue with low voltage caused a short, leading us to replace the contactor and fuses. After testing the unit, we confirmed there were no additional problems. We also noted the upstairs condenser was making a loud noise upon activation, although it was quiet during our visit, warranting further investigation.

An improperly sized air filter in the air handler was limiting airflow and efficiency. We checked the operation of the unit and cleaned the drains to ensure optimal performance. After identifying the issue, we recommended replacing the air filters with the correct size, thus enhancing the air quality and energy efficiency of the system.

A refrigerant leak in the 25-year-old unit prompted immediate action. We replaced the aging unit with a new 2.5-ton Goodman model featuring 5kw heat strips. With a 1-year parts and labor warranty included, our installation ensures that the home will enjoy reliable heating and cooling for years to come.

A misconfigured thermostat was preventing optimal heating in the home. We identified the faulty heater relay, replaced it, and reprogrammed the thermostat. This ensured the heat pump operated effectively, providing consistent warmth throughout the residence.

An issue with dirt accumulation on the evaporator coil was impacting the unit's performance. We conducted a thorough operational check, cleaned the drains, and identified excessive dirt coming from the tactical side. Additionally, we discovered that the retail drain lines contained lead in the pipes. To enhance air quality and system efficiency, we scheduled duct cleaning for Wednesday, Oct. 29th.

The thermostat's heat pump setting was incorrectly switched from O to B, causing the unit to operate in heating mode instead of cooling. We promptly reconfigured the thermostat to the correct setting, ensuring optimal functionality for cooling during warmer months. This adjustment restored comfort and efficiency, allowing the system to operate as intended.

Crushed ductwork in the crawl space above the employee lounge was obstructing airflow and causing discomfort. We efficiently cut out the damaged ductwork and replaced it with new materials, restoring proper ventilation and ensuring a comfortable environment for employees. This repair addressed the immediate issue and improved the overall air quality in the space.

Cleaned ducts with negative air machine.

Performed an evaporator coil cleaning

replaced 4-ton HVAC with a Trane unit.