Local contractor in 32244

A clogged drain line was causing significant drainage issues in the unit. We promptly cleaned out and flushed the drain line, restoring proper flow and preventing potential backups. This thorough service ensures the system operates smoothly, addressing the immediate problem effectively.

A malfunctioning air conditioning unit was discovered, with two faulty capacitors affecting the condenser fan motors. We addressed this issue by replacing the bad capacitors and also cleaned the condenser coils of the bar reach-in coolers. Additionally, we ensured proper operation by checking the overall functionality of the unit and replacing the air filter.

An issue with the electrical system arose due to a faulty 45/5 capacitor. We promptly replaced the defective component, restoring optimal functionality to the unit. This repair was crucial in ensuring the efficiency of the system, allowing it to operate smoothly and reliably for the customer.

A malfunctioning unit prompted a thorough inspection of its operation. We meticulously checked all components and ensured optimal functionality while cleaning the drains to prevent future blockages. This proactive maintenance not only restored efficiency but also helped extend the lifespan of the unit.

A malfunctioning air conditioning system was in need of urgent repair. We replaced the compressor and filter drier, adding 9 lbs of R410A refrigerant to restore optimal performance. Following this, we pressure tested and evacuated the system to ensure it operated efficiently, providing a comfortable indoor environment once again.

An outdated HVAC unit was inefficiently heating the space, prompting a replacement. We installed a 2.5 ton Trane unit equipped with 8kw heat strips, connecting it seamlessly to the existing copper lines, drain line, electrical setup, and ductwork. This installation comes with a 10-year parts warranty and a 1-year labor warranty, ensuring reliable performance for years to come.

A malfunctioning heating unit prompted the need for a swift replacement. We installed a 4-ton Trane heat pump unit equipped with 10 kW electric heat strips. The new system was seamlessly attached to the existing electrical, drain line, copper, and ductwork, ensuring efficient operation. This installation is backed by a 10-year parts warranty and a 1-year labor warranty.

The air conditioning unit was not performing optimally, prompting a thorough check of its operation. We cleaned the drains to ensure proper drainage and identified the need for replacing the air filters. This proactive maintenance enhances air quality and improves the efficiency of the unit, ensuring a comfortable environment.

An inefficient heat pump was impacting indoor comfort levels. We replaced the old 3.5 ton unit with a new Runtru 3.5 ton heat pump, ensuring optimal performance. The installation included connecting the new condenser and air handler to the existing ductwork, drain lines, copper lines, and electrical systems. This upgrade comes with a 10-year parts warranty and a 1-year labor warranty for peace of mind.

A leak in the copper line set posed a significant issue that needed immediate attention. We expertly identified the source of the leak and proceeded to replace the entire copper line set with new materials. This thorough repair not only resolved the leak but also ensured the system's efficiency and longevity, providing peace of mind to the homeowner.

A malfunctioning heating system prompted us to replace the existing unit with a new 4-ton RunTru heat pump unit, equipped with 5kw electric heat strips. This installation includes a comprehensive 10-year parts warranty and a 1-year labor warranty, ensuring reliable heating for years to come. We expertly installed the new unit, enhancing the home's comfort and efficiency.

A clogged drain line was obstructing proper operation, leading to inefficiency. We cleared and flushed the drain line to restore functionality. Additionally, we discovered the evaporator coil required cleaning, and the subcooling level was below the manufacturer’s specifications. We quoted $450 for pulling and cleaning the evaporator coil to ensure optimal performance.

A clogged drain line was obstructing proper waste flow, leading to potential backups. We efficiently cleaned out and flushed the drain line to restore its functionality. Additionally, we rerouted the drain line to enhance drainage efficiency and prevent future clogs, ensuring a reliable plumbing solution.

A malfunctioning compressor and low refrigerant levels were compromising the efficiency of the 23-year-old unit. We assessed the situation and recommended a complete replacement to ensure optimal performance. The installation of the new unit was executed with precision, providing the customer with a reliable solution to their heating and cooling needs.

A malfunctioning unit was causing operational issues, prompting our intervention. We meticulously checked the unit's operation and performed thorough cleaning of the drains, ensuring optimal performance. This proactive approach not only resolved the immediate problems but also improved the efficiency of the system, providing reliable service for future use.

A malfunction in the cooling system led to issues with temperature control. We tackled the problem by removing and chemically cleaning the evaporator coil, followed by reinstallation. After welding the joints and pressure testing the system with nitrogen, we evacuated the system and refilled it with fresh refrigerant. Additionally, we replaced the faulty 35/5 capacitor to restore optimal functioning.

An overcharged air conditioning unit was impacting performance, leading to cooling issues. We expertly replaced the 18x20x1 air filter and thawed the frozen evaporator coil, then adjusted the refrigerant to achieve the required 8° subcooling. We also installed a T5 smart thermostat, configuring it for optimal temperatures of 70° for cooling and 85° for heating, ensuring efficient operation.

A concern arose regarding a potential refrigerant leak in the cooling system. We conducted a thorough inspection and determined there was no leak present. Our diagnostic process ensured the system is operating efficiently, providing reassurance to the customer about their air conditioning unit's condition.

A leak in the liquid line filter drier prompted us to take action to ensure the refrigerant system functioned properly. We replaced the faulty filter drier, pressure tested and leak tested the entire system, evacuated it, and added new 410a refrigerant. To enhance system safety, we also installed locking refrigerant caps.

Experiencing inadequate cooling, we diagnosed the issue as a faulty evaporator coil and a leak in the condenser section. To resolve this, we replaced the evaporator coil and expertly repaired the leak in the condenser, ensuring the system operates efficiently and restores optimal cooling performance.

An inefficient heating system demanded urgent attention as the existing unit was replaced with a 4-ton Runtru heat pump equipped with 10kW electric heat strips. We ensured optimal performance and reliability by installing this unit, which comes with a 10-year parts warranty and a 1-year labor warranty, providing peace of mind for future seasons.

The operational efficiency of the HVAC unit had diminished, leading us to conduct vital maintenance. We carefully inspected the unit's performance, cleared the drains, and replaced the air filters. Additionally, we cleaned the condensers for the reach-in coolers in the bar to ensure reliable refrigeration and optimal performance.

A clogged drain line was leading to significant drainage issues. We expertly cleaned out the blockage and flushed the drain line to restore proper flow. This thorough approach ensured that the drainage system operates smoothly, preventing future clogs and associated problems.

During the annual maintenance on the HVAC unit, a significant buildup of debris was discovered in the drain line. We thoroughly cleaned out the drain line to restore proper drainage function and replaced the UV light bulb while on site, ensuring optimal performance of the system.

The HVAC system was not cooling effectively, identified as a malfunction due to a faulty capacitor. We promptly replaced the capacitor, restoring the system’s functionality and bringing the central AC back to optimal cooling performance for the residential customer.

The evaporator coil was found to be filthy, severely restricting airflow. We pulled the coil for thorough cleaning, pressure tested the system for leaks, evacuated it with a vacuum, and recharged the unit with new refrigerant to ensure optimal performance.

During routine maintenance, we discovered that the condenser fan motor was not running. To resolve this issue, we replaced the 45/5 capacitor, successfully restoring operation to both the fan motor and the compressor, ensuring optimal HVAC performance for the home.

During maintenance, we discovered that the condensing unit was shutting off due to the float switch being triggered from a clogged drain line. We promptly cleared the blockage to ensure proper drainage and restore functionality to the central AC system. The issue was resolved, enhancing the efficiency of the HVAC system for the residential property.

A malfunctioning central AC unit can be a huge inconvenience for any homeowner. We replaced the outdated 3-ton unit with an efficient Ameristar Heat Pump, ensuring optimal comfort and energy savings for the home. The installation was carried out with precision to enhance the overall HVAC system's performance.